Baileigh RDB-125 Manual Hydraulic Rotary Draw Tube Bender, 110V, 2" Mild Steel Pipe Schedule 40 Pipe Capacity

Baileigh RDB-125 Manual Hydraulic Rotary Draw Tube Bender,

Baileigh 110 volt hydraulic rotary draw tube bender. This hydraulic bender is designed to work with all drop on tool sets and constructed of only the best materials. A hydraulic system to turn the ratchet plate and do the actual bending. This pipe bender uses powerful low pressure industrial grade hydraulics making it quiet, quick, and very safe to use even when bending at full capacity. It has a capacity of 2-1/2-inches outside diameter tubing, 2-inches outside diameter chromalloy, 2-inches square tubing, and 2-inches schedule 40 pipe. It has a maximum center line of 8-inches depending on the outside diameter of the material being bent. It will bend to 200 degrees allowing for true 180 degree bends without having to repin the die set and it only takes 4 complete pushes to reach 180 degrees. Utilizing its built in anti-spring back mechanism. It can retract its hydraulic cylinder without worry of losing its place in the bend. A quick release counter die positioner is also included to make material loading and unloading a breeze. Minimum CLR: 0.5-inches; minimum outside diameter: 1/4-inches; mild steel solid rod: 1.25-inches; mild steel pipe schedule 40: 2-inches; mild steel round tube wall: 2.5-inches (0.125); mild steel square tube (wall): 2-inches (0.125); stainless steel pipe s...

  • Brand: Baileigh
  • ASIN: B00F8M3EDK

Baileigh RDB-175 Hydraulic Rotary Draw Tube Bender, 110V, 2" Schedule 40 Pipe Capacity

Baileigh RDB-175 Hydraulic Rotary Draw Tube Bender, 110V,

Baileigh 110 volt hydraulic rotary draw tube bender. This easy to use hydraulic tube bender has an incredible capacity of 2-inches schedule 40 pipe and up to 2-1/2-inches tubing with a wall thickness of 0.120-inches mild steel. This makes quick work of round tube, pipe, and square tubing. It is easy to read digital degree indicator with auto stop programming. The best part of the new digital readout package is that the programming is measured on the die head (spindle) instead of cylinder placement which is the only place to get as true reading of bend degree. It has ratcheting counter die adjustment for quick tooling changes. It is capable of utilizing up to a 9-inches center line radius, which will take care of 90 percent of applications. It uses a foot pedal to control the movements of the bender, leaving the operators hands free to control the material. Minimum CLR: 0.5-inches; minimum outside diameter: 1/4-inches; mild steel solid rod: 1.25-inches; mild steel pipe schedule 40: 2-inches; mild steel round tube wall: 2.5-inches (0.125); mild steel square tube (wall): 2-inches (0.125); stainless steel pipe schedule 40: 1.5-inches; stainless steel round tube wall: 2.375-inches (0.125); chromalloy round tube wall: 2-inches (0.125); aluminum round tube wall: 2.5-inches (0.156); maxi...

  • Brand: Baileigh
  • ASIN: B00F8M3KCU

Baileigh RDB-250 Rotary Draw Tube Bender, 1-Phase 220V, 2" Mild Steel Pipe Schedule 40 Pipe Capacity

Baileigh RDB-250 Rotary Draw Tube Bender, 1-Phase 220V,

Baileigh single-phase 220 volt rotary draw tube bender with 170 job programmer. The tube bender has enough power to bend up to 2-1/2-inches tubing and 2-inches schedule 40 pipe, making it extremely useful for any chassis or handrail application. It can bend to 180 degrees in at a blistering speed of 9 seconds and can be programmed to bend up to 360 degrees in both left and right directions, great for solid rod applications when teamed up with a universal bend plate. The bender makes quick work of complex serpentine bends because of its unique quick release counter die mount and easy to use touch screen controller. The controller on the tube bender features an internal memory that can hold 170 programs with 10 bends per program. It also accepts a memory card for unlimited program storage. The bender can also be used in manual mode for those one off prototypes for witch setting a program is not necessary. It has a foot pedal control for even more versatility. Tube bender is that it accepts an index table. An index table is important for keeping a section of bends during a program on the correct plane to achieve the most accurate finished product possible. It is the most revolutionary and economical programmable bender on the market for its capacity. Minimum CLR: 0.5-inches; minimum...

  • Brand: Baileigh
  • ASIN: B00F8M3M7I

Baileigh RP-3B 2 Piece Rotary Draw Tooling Round Pipe Die Set, For 1-1/4" - 1-1/2" Pipe

Baileigh RP-3B 2 Piece Rotary Draw Tooling Round

Baileigh rotary draw tooling round pipe die package includes: 1-1/4-inches round pipe die at 3-inches center line radius, 1-1/2-inches round pipe die at 3-3/4-inches center line radius.

  • Brand: Baileigh
  • ASIN: B00F6GDUQY

Baileigh RDB-325 Rotary Draw Programmable Pipe Bender, 1-Phase 220V, 2" Mild Steel Pipe Schedule 80 Pipe Capacity

Baileigh RDB-325 Rotary Draw Programmable Pipe Bender, 1-Phase

Baileigh rotary draw programmable pipe bender has a massive capacity of 2-inches schedule 80 pipe (mild steel T.S. 64,000 pounds per square inch) and 3-inches round tubing with a 16-inches maximum center lines depending on material outside diameter. This is the same high quality tooling that entire line. It requires just 220 volts of single phase power that allows it to work in almost any fabrication setting. This pipe bender comes standard with a simple to use touch-screen controller that holds up to 170 programs with up to ten bends per program. If more memory is needed a memory card can be used to store programs as well. It comes standard with simple to use foot pedal controls and a swing away counter die system for increased production. Another nice feature of pipe bender is that it can rotate up to 360 degrees in either direction, making it a great machine when using our optional universal bending plate for rod applications. This bending machine has been designed and built to be a work horse for any fabrication shop for decades to come. Minimum CLR: 0.5-inches; minimum outside diameter: 1/4-inches; mild steel solid rod: 1.25-inches; mild steel pipe schedule 80: 2-inches; mild steel round tube wall: 3-inches (0.095); mild steel square tube (wall): 2-inches by 2-inches (0.187)...

  • Brand: Baileigh
  • ASIN: B00F8M3NP4

Baileigh RDB-350-TS Rotary Draw Programmable Tube Bender, 3-Phase 220V, 2.5" Mild Steel Pipe Schedule 40 Pipe Capacity

Baileigh RDB-350-TS Rotary Draw Programmable Tube Bender, 3-Phase

Baileigh rotary draw programmable tube bender. This bender has the capacity to bend 2.5-inches schedule 40 pipe and up to 3-inches tube with a 0.187-inches wall thickness. It is standard drop on tooling. It is one shot bending to 360 degree both left and right. The 180 degree bends can be achieved in about 16 seconds. Quick release counter die system allows maximum efficiency because the pipe bender can be loaded and unloaded quickly for high production runs. It has a user friendly touch-screen controller that allows the user to store up to 170 programs within the memory of the controller itself and unlimited program storage/backup via micro SD port, with up to 10 bends per program. It can be programmed for desired angle, spring back for the material, and speed of the bend. Rotational orientation can also be kept track of within the programmer. Another unique feature of this pipe bender is the 320 degree rotation of the controllers head. This feature allows to be operated from any location around the machine. When the table is attached to the tube bender, it helps achieve very accurate bends in varying planes, as well as consistent measurements between bends. Minimum CLR: 0.5-inches; minimum outside diameter: 1/4-inches; mild steel solid rod: 1.5-inches; mild steel pipe schedule ...

  • Brand: Baileigh
  • ASIN: B00F8M3PJI

Baileigh RP-1B 5 Piece Rotary Draw Tooling Round Pipe Die Set, For 1/2" - 1-1/2" Pipe

Baileigh RP-1B 5 Piece Rotary Draw Tooling Round

Baileigh rotary draw tooling round pipe die package includes: 1/2-inches round pipe die at 2-1/2-inches center line radius, 3/4-inches round pipe die at 3-inches center line radius, 1-inches round pipe die at 3-inches center line radius, 1-1/4-inches round pipe die at 4-inches center line radius, 1-1/2-inches round pipe die at 5-inches center line radius.

  • Brand: Baileigh
  • ASIN: B00F6GDGQS

Baileigh RDB-150-AS Hydraulic Rotary Draw Pipe Bender with Auto Stop, 110V, 2" Mild Steel Pipe Schedule 40 Pipe Capacity

Baileigh RDB-150-AS Hydraulic Rotary Draw Pipe Bender with

Baileigh 110 volt hydraulic rotary draw pipe bender. This hydraulic tube bender to consistently and accurately bend tube and pipe to 180 degrees in one shot. It takes the hydraulic pipe bender to the next level by adding an accurate auto stop feature that allows the operator to set a desired bend degree and the machine will stop at that degree every time, without worry. It uses a low pressure hydraulic system that operates on 110 volts. This hydraulic system allows to bend 2-inches schedule 40 pipe and up to 2-1/2-inches tubing with a wall thickness of 0.120-inches mild steel. This hydraulic bender is designed to work with all drop on tooling. This style of tooling is preferred because the finished product possibilities are far greater then with conventional "sandwiched" bending die designs. It an easy to read degree indicator and quick release counter die system, which allows the pipe bender to be loaded and unloaded quickly. It includes wheels, this help with shops that are especially small and allows the bender to be pushed out of the way when not in use. Minimum CLR: 0.5-inches; minimum outside diameter: 1/4-inches; mild steel solid rod: 1.25-inches; mild steel pipe schedule 40: 2-inches; mild steel round tube wall: 2.5-inches (0.125); mild steel square tube (wall): 2-inches ...

  • Brand: Baileigh
  • ASIN: B00F8M3INQ

Baileigh RDB-150 Hydraulic Rotary Draw Tube Bender, 110V, 2" Mild Steel Pipe Schedule 40 Pipe Capacity

Baileigh RDB-150 Hydraulic Rotary Draw Tube Bender, 110V,

Baileigh 110 volt hydraulic rotary draw tube bender. It became the first hydraulic tube bender to consistently and accurately bend tube and pipe to 180 degrees in one shot. It is the perfect bender for small to medium fabrication to save time and money. It uses a low pressure industrial grade hydraulic system that operated on 110 volts. This industrial grade system allows to bend 2-inches schedule 40 pipe and up to 2-1/2-inches tubing with a wall thickness of 0.120-inches mild steel. It has an 8-inches centerline radius maximum, depending on the outside diameter of the material being bent. This hydraulic bender is designed to work with all drop on tooling. It is an easy to read degree indicator and quick release counter die system, which allows the pipe bender to be loaded and unloaded quickly. The base of the tube bender also includes wheels. This helps especially small and allows the bender to be pushed out of the way when not in use. Minimum CLR: 0.5-inches; minimum outside diameter: 1/4-inches; mild steel solid rod: 1.25-inches; mild steel pipe schedule 40: 2-inches; mild steel round tube wall: 2.5-inches (0.125); mild steel square tube (wall): 2-inches (0.125); stainless steel pipe schedule 40: 1.5-inches; stainless steel round tube wall: 2.375-inches (0.125); chromalloy rou...

  • Brand: Baileigh
  • ASIN: B00F8M3GJW
Similar Baileigh Pipe Bender Shopping
Baileigh Pipe Bender Video Reviews

Tube and Pipe Bender, RDB-125 Baileigh Industrial

Baileigh Pipe Bender

http://metal.baileighindustrial.com/pipe-bender-rdb-125 Baileigh Industrial is proud to introduc...

Теги: Tube and Pipe Bender,Tube Bender,Tubing Bender,...

Baileigh RDB-050 Tube Bender, 3 speeds, Large Capacity Tubing and Pipe Benders

Baileigh Pipe Bender

http://metal.baileighindustrial.com/manual-tube-bender-rdb-050 The RDB-050 manual tube bender is...

Теги: Baileigh RDB-050 Tube Bender,3 speeds

Baileigh RDB 250 Tube Bender Demo

Baileigh Pipe Bender

Actual Customer Demo Bending Up Handrail Shop: Rob Hailstone Machining & Welding Alvins...

Теги: Baileigh RDB-250 Tube Bender