Sandvik Coromant CoroTurn 107 Cermet Turning Insert, SCMT, Square, PM Chipbreaker, CT5015 Grade, Uncoated, SCMT 3(2.5)2-PM, 3/8" iC, 0.0315" Corner Radius (Pack of 10)

Sandvik Coromant CoroTurn 107 Cermet Turning Insert, SCMT,

The Sandvik Coromant SCMT CT5105 uncoated carbide indexable turning insert with a choice of PM and PF chipbreaker has a square shape with a 7-degree clearance angle, provides hardness without limiting toughness for wear- and shock- resistance for turning of steel in average to good machining conditions. The single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and four cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used for facing, interrupted cuts, and large lead angles. This uncoated cermet grade provides wear resistance without limiting shock resistance. It also prevents a built-up edge, resulting in a higher quality surface finish and longer tool life than provided by other grades. The SCMT CT5015 is available with a choice of two types of chipbreakers: PM and PF. The PM chipbreaker style is designed for medium machining of steel, offering a wider range of cutting depth and feed rate combinations than the PF style. The PF chipbreaker style is designed for low cutting depths and low feeds when finishing steel. Tolerance of distance from the outer edge of the inscribed circle to the point of the square is + or - 0....

  • Brand: Sandvik Coromant
  • ASIN: B0040QD9YE

Sandvik Coromant 2-DCMT 3(2.5)1-PF 5015 CoroTurn 107 Cermet Turning Insert, DCMT, 55 Degree Diamond, PF Chipbreaker, CT5015 Grade, Uncoated, DCMT 3(2.5)1-PF, 3/8" iC, 0.0157" Corner Radius (Pack of 2)

Sandvik Coromant 2-DCMT 3(2.5)1-PF 5015 CoroTurn 107 Cermet

The Sandvik Coromant DCMT CT5015 indexable turning insert with a choice of PM, UM, PF, or UF chip breaker style has a 55-degree diamond shape (also called rhombic) and a 7-degree clearance angle, providing high wear resistance for medium machining and finishing of steel in good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and two cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. The insert’s uncoated cermet carbide provides high hardness for wear resistance. It also minimizes a built-up edge, resulting in a higher quality surface finish and longer tool life than provided by other grades. The DCMT CT5015 is available with a choice of four chip breakers: PM, UM, PF, or UF. The PM and UM chip breakers are designed for medium machining cutting depths and feed rates. The UM chip breaker has a higher range of cutting depths and feed rates than the PM chip breaker. The PM chip breaker should be chosen over the UM chip breaker when machining against a shoulder with a l...

  • Brand: Sandvik Coromant
  • ASIN: B011C8VY1W

Boeray 1pcs MTJNR2525M16 Turning Tool Holder + 10pcs TNMG160404 MT D550 Carbide Inserts + 2pcs Wrench CNC Turning Tool

Boeray 1pcs MTJNR2525M16 Turning Tool Holder + 10pcs

Boeray 1pcs MTJNR2525M16 Turning Tool Holder + 10pcs TNMG160404 MT D550 Carbide Inserts + 2pcs Wrench CNC Turning Tool 10pcs TNMG160404 MT D550 Carbide Inserts and 1pcs MTJNR2525M16 Turning Tool Holder and 2pcs Wrench CNC Turning Tool; Material: cermet; Usage: for steel processing OR similar hard steel processing; Profiling bar for semi-finishing and finishing operations; Good toughness and hardness, long service life; Comes with a box to store the boring bar and wrenches. Comes with a box to store Carbide Inserts.Very convenient;

  • Color: TNMG160404 MT D550
  • Brand: Boeray
  • ASIN: B07FKD2C5F
  • UPC: 667797545543

Sandvik Coromant CoroTurn 107 Cermet Turning Insert, VBMT, 35 Degree Diamond, PF Chipbreaker, CT5015 Grade, Uncoated, VBMT 222-PF, 1/4" iC, 0.0315" Corner Radius (Pack of 10)

Sandvik Coromant CoroTurn 107 Cermet Turning Insert, VBMT,

PF finishing chipbreaker steel insert type. An uncoated cermet with excellent resistance to built-up-edge and plastic deformation. New formula with improved toughness. For finishing of low alloyed and alloyed steels when high surface quality and/or low cutting forces are required.

  • Brand: Sandvik Coromant
  • ASIN: B0040QCMMO

Sandvik Coromant T-Max P Wiper Cermet Turning Insert, WNMG, Trigon, WF Chipbreaker, CT5015 Grade, Uncoated, WNMG 431-WF, 1/2" iC, 0.0157" Corner Radius (Pack of 10)

Sandvik Coromant T-Max P Wiper Cermet Turning Insert,

An uncoated cermet with excellent resistance to built-up-edge and plastic deformation. New formula with improved toughness. For finishing of low alloyed and alloyed steels when high surface quality and/or low cutting forces are required.

  • Brand: Sandvik Coromant
  • ASIN: B0040QCVBQ

Kyocera TNMA322 TC30 USA Made Cermet Turning Insert TNMA 322 60 Degrees Cermet Uncoated [10 Pieces]

Kyocera TNMA322 TC30 USA Made Cermet Turning Insert

Kyocera TNMA322 TC30 USA Made Cermet Turning Insert TNMA 322 60 Degrees Cermet Uncoated [10 Pieces]

  • Brand: Kyocera
  • ASIN: B07B4J4PBV

5735964, Cut-Off Inserts Material: Cermet Insert Style: N123

5735964, Cut-Off Inserts Material: Cermet Insert Style:

Cermet is comprised of ceramic and metal. It can be used at higher speeds than coated carbides. It is commonly used on cast iron, steel, stainless steel and nonferrous materials. Specification:Cut-Off Inserts; Material: Cermet; Insert Style: N123; Insert Size: H2; Cutting Width (mm): 4.00; Cutting Width (Decimal Inch): 0.1575; Manufacturer's Grade: 525Material: CermetInsert Style: N123Insert Size: H2Cutting Width (mm): 4.00Cutting Width (Decimal Inch): 0.1575Manufacturer's Grade: 525Coating: UncoatedSeries: CoroCut 1-2Relief Angle: 7Maximum Depth of Cut (mm): 24.10Maximum Depth of Cut (Decimal Inch): 0.9488Chipbreaker: CMCorner Radius (Decimal Inch): 0.007874Corner Radius (mm): 0.2Insert Hand: NeutralInsert Holding Method: ClampInsert Seat Size: H

  • Brand: Sandvik Coromant
  • ASIN: B07DRC5119

Mitsubishi Materials TPMR323 MP3025 Cermet TP TYPE Turning Insert without Hole, Coated, Triangular, Grade MP3025, 0.375" Inscribed Circle, 0.125" Thick, 0.047" Corner Radius, (Pack of 10)

Mitsubishi Materials TPMR323 MP3025 Cermet TP TYPE Turning

Mitsubishi Materials USA Corporation manufactures cutting tools, rock tools, electronic components and materials, and hard materials solutions for use in manufacturing processes across multiple industries. The company, a wholly subsidiary of Mitsubishi Materials Corporation, was established in 1984 and has its USA headquarters in Fountain Valley, CA.

  • Brand: Mitsubishi Materials
  • ASIN: B01EKB9F9Q

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG, Triangle, PF Chipbreaker, GC1525 Grade, TiCN Coating, TNMG 333-PF, 3/8" iC, 0.0472" Corner Radius (Pack of 10)

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG,

The Sandvik Coromant TNMG GC1525 indexable turning insert with a choice of LC, PF, L-K, or R-K chipbreaker style, has a triangle shape with a 60-degree cutting angle, providing wear resistance without limiting shock resistance for finishing of steel in average to good machining conditions. This double-sided negative insert has a chip groove on both sides, a hole in the center and six cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. GC1525 grade is a combination of a carbide substrate and a cermet coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied through physical vapor deposition (PVD), which provides hardness for wear resistance and good edge toughness without limiting shock resistance when turning at medium to high cutting speeds. PVD coatings give the insert longer life and better wear resistance than uncoated inserts, and maintain a sharper cutting edge than those with chemical vapor deposition (CVD) coatings. The TNMG GC1525 is available with a choice of four types of chipbreakers: LC, PF, L-K, or R-K, for low cutting depths and feed rates. The PF chipbreaker should be chosen when surface finish demands are a priority. The LC chipbreaker should be chosen for operations where th...

  • Brand: Sandvik Coromant
  • ASIN: B0040QDQVU
Similar Cermet Inserts Shopping
Cermet Inserts Video Reviews