Creative Hobbies ELY1089 - Steel All Thread Lamp Pipe Nipples - 1-1/2 Inch Long, Yellow Zinc Coated, 1/8IP Standard Thread, Hardware DIY Repair Part - Pack of 20 Pieces

Creative Hobbies ELY1089 - Steel All Thread Lamp

Creative Hobbies® ELY1089 - 1-1/2 Inch Long Steel All Thread Nipples Pack of 25 Pieces. 1/8IP threaded nipples fit standard lamp pipe measuring 3/8 inch outside diameter. 1-1/2 Inch Long, Yellow Zinc Coated Steel, 1/8IP Standard Lamp Pipe, hollow steel. Perfect for replacing, repairing or creating lamps and lighting products. These all thread pipes are sized to fit standard lamp sockets, necks, and hardware designated 1/8IP thread. Imported

  • Color: Gold
  • Brand: Creative Hobbies
  • ASIN: B07DDZL61V
  • UPC: 816682023226

Flextron FTGF-01F34 Gas Connector Adpater Fitting with 1 Inch Outer Diameter Flare Thread x 3/4 Inch FIP, Uncoated Stainless Steel, for Log & Space Connectors, Excellent Corrosion Resistance

Flextron FTGF-01F34 Gas Connector Adpater Fitting with 1

The Flextron Steel Female gas fitting adapts gas connector nut to appliance inlet or gas supply. These fittings are from FTGC-34 series and manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The female end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Threads create a cold weld with the end of the gas connector, making a strong and leak tight seal. This Fitting is used with 1 inch outer diameter flare x 3/4 inch (FIP) female iron pipe. Gas connector adaptor fitting for appliances with moderate BTU demands such as a four-burner stove, water heater or dryer.

  • Color: Stainless Steel
  • Brand: Flextron
  • ASIN: B012TPV8GS
  • UPC: 854263054955

Flextron FTGF-58F12 Gas Connector Adpater Fitting with 5/8 Inch Outer Diameter Flare Thread x 1/2 Inch FIP, Uncoated Stainless Steel, for Range & Furnace Gas Connectors, Excellent Corrosion Resistance

Flextron FTGF-58F12 Gas Connector Adpater Fitting with 5/8

The Flextron Steel Female gas fitting adapts gas connector nut to appliance inlet or gas supply. These fittings are from FTGC-12 series and manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The female end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Threads create a cold weld with the end of the gas connector, making a strong and leak tight seal. This Fitting is used with 5/8 inch outer diameter flare x 1/2 inch (FIP) female iron pipe. Gas connector adaptor fitting for appliances with moderate BTU demands such as a four-burner stove, water heater or dryer.

  • Color: Stainless Steel
  • Brand: Flextron
  • ASIN: B012TPVGXI
  • UPC: 854263054948

Rain Bird RISER2 PVC Spray Head Riser, 1/2" Male Pipe Thread x 1/2" Male Pipe Thread, 2" Length

Rain Bird RISER2 PVC Spray Head Riser, 1/2"

Rain Bird RISER2 PVC Spray Head Riser, 1/2" Male Pipe Thread x 1/2" Male Pipe Thread, 2" Length. This 1/2" diameter riser is the perfect choice for underground or above-ground connections. 2” long fixed black PVC riser with 1/2” male pipe threaded (MPT) ends. Ideal for elevating spray nozzles to clear obstacles or plants; excellent for use in flower beds, mass plantings and ground cover. Compatible with all Rain Bird matched precipitation rate (MPR) spray and shrub nozzles. Fits all brands of 1/2” inlet sized impact sprinklers, pop-up sprays, and rotors. Black color helps riser blend into foliage. Also available (sold separately) in: 12'' (RISER12), and 3'' (RISER3) models. Rain Bird “The Intelligent Use of Water”

  • Brand: Rain Bird
  • ASIN: B000CZ2XV2
  • UPC: 077985380823

Hillman Hardware Gauge (1)

Hillman Hardware Gauge

Comprehensive hardware gauge providing extensive measuring, sizing, conversion and layout options. A must have for any toolbox. A gift for the handyman/woman that will be greatly appreciated.

  • Brand: Hillman
  • ASIN: B00L8T7VNG
  • UPC: 008236956160

SODIAL 12mm thread 50mm diameter steel wire pipe cleaning chimney brush 2pcs

SODIAL 12mm thread 50mm diameter steel wire pipe

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) 12mm thread 50mm diameter steel wire pipe cleaning chimney brush 2pcsBurst diameter: 50mm / 2 inchBurst length: 10cm / 4 inchTotal length: 15cm / 6 inchExternal thread diameter. : 12mm / 0.47 inchWeight: 153gScope of delivery: 2 x steel wire tube brushOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/-1-3cm.

  • Color: Black & silver tone
  • Brand: SODIAL
  • ASIN: B06VX7WRSL
  • UPC: 191466107959

uxcell 10mm Pipe Diameter M6 Thread Round Bend U-Bolt Fastener 10pcs

uxcell 10mm Pipe Diameter M6 Thread Round Bend

Round bend U bolts are typically used for attaching pipe or steel round bar to a round wood or steel post.Another common application is to hang wrought iron pipe in mechanical installations.U type bolt is used widely, the main purpose is: Construction and installation, mechanical fittings connection, vehicle ship, bridge tunnel railway, etc.

  • Brand: uxcell
  • ASIN: B01AXVSVK6
  • UPC: 712662964773

Everflow Supplies NRLB1004 4" Long Black Left/Right Steel Nipple Pipe Fitting with 1" Nominal Size Diameter

Everflow Supplies NRLB1004 4" Long Black Left/Right Steel

This is an Ever flow Supplies left/right nipple fitting with on one end standard right handed thread and on the other hand thread in the reverse Direction. It is made of steel and has a black coating for improved its durability. The nipple is 4 inch long and has a 1 inch nominal pipe size diameter. The fitting meets all applicable ansi and ASTM standards.

  • Brand: Everflow Supplies
  • ASIN: B016Y8IY40
  • UPC: 804595966822

1/8"-27 NPS Round Pipe Die, 1" Outside Diameter - High Speed Steel - National Pipe Straight

1/8"-27 NPS Round Pipe Die, 1" Outside Diameter

Round, Split, Adjustable Dies. Besides use on pipes, National Pipe Straight threads are frequently found on lighting fixtures.

  • Brand: Dies - Round - NPS
  • ASIN: B005KLWUY8
Similar Pipe Thread Diameter Shopping
Pipe Thread Diameter Video Reviews

Working with NPT Fittings in Homebuilt Aircraft

Pipe Thread Diameter

This short video describes the details of working with NPT fittings and pipes while plumbing brak...

Теги: Tip of the Week,HomebuiltHELP,NPT,fuel system,h...

Identifying Thread Pitch & Size

Pipe Thread Diameter

Learn to identify thread pitch and size using calipers, a pitch gauge, and thread identification ...

Теги: fractional threads,parallel threads,pitch gauge...

How To Correctly Measure Pipe Threads

Pipe Thread Diameter

Measuring pipe threads seems simple enough, but can be a bit tricky. This short How To will expla...

Теги: Air Compressor How To,Compressor How To,How To ...