Thomson A4812, Ball Bushing Bearing, Precision Steel, A Grade, Closed, for end supported applications; use with 0.25 in Diameter Shaft, Class S

Thomson A4812, Ball Bushing Bearing, Precision Steel, A

Precision Steel Ball Bushing Bearings are available in an open version for continuously supported applications and a closed version for end supported applications. Extra precision and adjustable versions are available for end supported applications requiring higher precision and repeatability. Precision Steel Ball Bushing bearing products are also available factory installed in a self-aligning, malleable iron pillow block minimizing installation time. The all-steel design makes the Precision Steel Ball Bushing bearing product line perfect for replacing plain Bearings in high temperature applications.

  • Brand: Thomson
  • ASIN: B001VXY2G8
  • UPC: 662486826019

Thomson QS 12 MM 500, Quick Shaft, 11.99 / 12.00 mm Diameter, Class MM, Carbon Steel, 60 Rockwell C Min., 500 mm long

Thomson QS 12 MM 500, Quick Shaft, 11.99

While Shafts may appear the same, there are significant performance differences due to the manufacturer’s selected standards, and the manufacturing processes used to achieve them. The linear inner race demands the highest levels of material cleanliness, surface topography, surface hardening, diameter, taper and roundness, surface finish and straightness to provide optimum performance, minimal maintenance and long life. Unlike common shafting, Thomson 60 Case LinearRace shafting is manufactured to the highest quality standards. Our techniques are continuously upgraded with proprietary know-how gained from over 53 years of linear bearing design and manufacture. Using 60 Case LinearRace shafting with Thomson Ball Bushing Bearings ensures optimal bearing performance and travel life.

  • Brand: Thomson
  • ASIN: B00TSGLXFS
  • UPC: 662486466277

Thomson SPM08WW, Ball Bushing Bearing, Super, Closed, for end supported applications, self-aligning, Seals at both ends; use with 8 mm Diameter Shaft

Thomson SPM08WW, Ball Bushing Bearing, Super, Closed, for

Super Ball Bushing Bearings offer three times the load capacity or twenty seven times the life of conventional linear Bearings. Industry standard self-aligning Super Ball Bushing Bearings ease installation and minimize wear from minor bore misalignment. Super Ball Bushing Bearings can achieve speeds up to 10 ft/s and accelerations up to 450 ft/s2 without the derating factors commonly found in linear guide products. With a coefficient of friction as low as .001, Super Ball Bushing Bearings provide a quick easy replacement for high friction plain Bearings. The wear resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.

  • Brand: Thomson
  • ASIN: B00BJD7730
  • UPC: 662486260493

Thomson S12-09A4-04, Electrak 1 Actuator, 12 Vdc, 25 lbf Capacity, Acme screw, 4 in Stroke, 2.10 in/s Travel rate

Thomson S12-09A4-04, Electrak 1 Actuator, 12 Vdc, 25

Thomson actuators are easy to mount and operate, require no maintenance, don’t leak hydraulic fluid, are easy to incorporate into an automated process and once installed they will work reliably under the toughest conditions year after year. Actuators offer advantages over mechanical and hydraulic systems in many applications. They are self-contained, rugged and durable, making them ideal anywhere you want to lift, lower, push, pull, rotate or position a load. Thomson Electrak actuators can be found in the most diverse applications, ranging from agricultural to industrial, ventilation and medical equipment. Anywhere you want to lift, lower, push, pull, rotate or position a load - only your imagination will set the limit. Typical Applications are as Mobile-off-highway, Turf and garden, Industrial equipment, Health and fitness, Office, domestic and entertainment equipment, Marine and Ventilation and process control.

  • Brand: Thomson
  • ASIN: B00TU2N3B2

Thomson SPM08W, Ball Bushing Bearing, Super, Closed, for end supported applications, self-aligning, Seals at one end; use with 8 mm Diameter Shaft

Thomson SPM08W, Ball Bushing Bearing, Super, Closed, for

Thomson Linear Motion manufactures control, drive, motor, power transmission and precision linear motion technologies.The company, founded in 1905 and headquartered in Washington, DC, meets International Organization for Standardization (ISO) standard 9001.

  • Brand: Thomson
  • ASIN: B00BJD74X8
  • UPC: 662486260479

Thomson A101824, Ball Bushing Bearing, Precision Steel, A Grade, Closed, for end supported applications; use with 0.625 in Diameter Shaft, Class S

Thomson A101824, Ball Bushing Bearing, Precision Steel, A

This Thomson Precision series closed type ball bushing bearing provides free linear movement on a hardened steel shaft. Ball bushing bearings are linear ball bearings that reduce friction for linear motion. The bearing’s outer sleeve is made of hardened 52100 steel for strength and resistance to wear, and the balls are made of chrome steel for high load capacity and resistance to wear. The balls are recirculated to reduce wear and provide a low coefficient of friction, allowing the use of smaller motors, belts, and gears compared to conventional linear bearings. The bearing has a maximum operating temperature of 500 degrees F (260 degrees C). This ball bushing bearing is shipped with a rust preventative oil, and is used in XY tables and other types of motion control equipment.Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a fl...

  • Brand: Thomson
  • ASIN: B0071AQ6LE
  • UPC: 662486100218

Thomson SSUPBO12, Pillow Block, Super, Open, for continuously supported applications, Adjustable, self-aligning; use with 0.75 in Diameter Shaft, Class L

Thomson SSUPBO12, Pillow Block, Super, Open, for continuously

Ball Bushing bearing pillow blocks are provided with integral, double acting seals that keep out contaminants and retain lubrication, maximizing system performance and life. Twin versions provide up to twice the load capacity or eight times the life of single versions, allowing the use of smaller and less expensive drives, motors and ball screws. When replacing v-ways and flat-ways, the Ball Bushing bearing pillow block’s low coefficient of friction reduces power consumption and provides important design economies.

  • Brand: Thomson
  • ASIN: B001VY199U
  • UPC: 662486110033

Thomson FNYBU16, Bushing Bearing, FluoroNyliner, non-aligning, Closed, for end supported applications; use with 1 in Diameter Shaft, Class L

Thomson FNYBU16, Bushing Bearing, FluoroNyliner, non-aligning, Closed, for

Thomson FluoroNyliner Bushing Bearings offer: High performance in contaminated, wash down, or submerged environments, Proprietary, self-lubricating, composite bearing liner TEP 950, Low friction, ideally suited for linear and rotary motion, Precision machined aluminum sleeve, Excellent performance in high vibration and mechanical shock applications, Corrosion resistance, Product availability in industry standard sizes from 0.25” to 2.00”, Eight bearing configurations, include closed, open, self-aligning, precision and compensated IDs, Load capacities up to 14,000 lbf, Integral seals, Closed, Open, and Flanged Pillow Blocks available in single or twin versions.

  • Color: Black
  • Brand: Thomson
  • ASIN: B00BJBGRO2
  • UPC: 662486108276

Thomson SSU10WW, Ball Bushing Bearing, Super Smart, Closed, for end supported applications, self-aligning, Seals at both ends; use with 0.625 in Diameter Shaft, Class L

Thomson SSU10WW, Ball Bushing Bearing, Super Smart, Closed,

Thomson Linear Motion manufactures control, drive, motor, power transmission and precision linear motion technologies.The company, founded in 1905 and headquartered in Washington, DC, meets International Organization for Standardization (ISO) standard 9001.

  • Brand: Thomson
  • ASIN: B00BJD7Q54
  • UPC: 662486276906
Similar Thomson Linear Bearing Shopping
Thomson Linear Bearing Video Reviews

MiHow2 - Thomson Linear - Installing the Proper Linear Guides in Various Applications

Thomson Linear Bearing

Thomson Linear discusses different linear application examples and how to choose the correct type...

Теги: Linear Guides,linear,round rail,profile rail,lo...

The Thomson Glide Screw™- What's the buzz all about!

Thomson Linear Bearing

The Glide Screw™ is the latest in a line of breakthrough innovations from Thomson. Thomson has c...

Теги: Thomson,Glide Screw,Glidescrew

Skip the linear bearing and lead screw, glide screws are both

Thomson Linear Bearing

In this video, Lisa Eitel and Miles Budimir, motion editors with Design World, explain how a Thom...

Теги: design world,Thomson,linear motion control,moti...